GC0308 has a 1/7 inch optical format with 640V x 480H resolution and a 4-transistor pixel structure for high image quality and low noise variation. It provides excellent image quality through a powder. On-chip design of a 10-bit ADC and embedded image signal processor. The comprehensive integration of high performance and low power consumption functions makes GC0308 most suitable for design, reducing the implementation process, and extending the battery life of mobil phones, PDAs and a variety of mobile applications.

GC0308 Camera Module Recommendation

Dogoozx 0.3MP telephoto narrow angle 6 degrees dvp GC0308 motion detection camera module

DGZX0308-A35 GC0308 DVP 스캔 카메라 모듈 0.3MP 640*480 30fps ISP 포함 왜곡 없음 ESP32 보드 지원

Dogoozx 0.3W USB GC0308 VGA 왜곡 없는 스캐닝 카메라 모듈 식별에 사용

Dogoozx HD 0.3MP GC0308 VGA with ISP mipi motion detection scan code DVP camera module

Dogoozx Low illumination 0.3MP GC0308 VGA 30fps DVP Security Monitoring Camera Module

Dogoozx Low Light GC0308 Development Board Usb Thermal UAV Visual Intercom Camera Module

Dogoozx Low price wholesale high sensitivity GC0308 VGA QR code scanning camera module

Frequently Asked Questions about GC0308 Camera Sensor.

1. What is the resolution of GC0308 Camera Sensor?

A: The resolution of GC0308 Camera Sensor is 300,000 pixels, specifically 648×488 pixels. This resolution is suitable for a variety of application scenarios, such as face recognition, security monitoring, etc.

2. What are the common image problems of GC0308 Camera Sensor during use?

A: The common image problems of GC0308 Camera Sensor during use mainly include:

Incorrect image color parsing: This may be caused by data transmission errors, improper clock polarity settings, or image function module configuration errors. Solutions include checking the data transmission line, adjusting the clock polarity settings, and adjusting the configuration of the image function module.

Excessive image noise: In low light conditions, GC0308 Camera Sensor may produce more noise. This can be improved by adjusting the exposure time and gain settings, enabling the noise suppression function, or upgrading the driver/software version.

3. What are the power supply requirements of GC0308 Camera Sensor?

A: GC0308 Camera Sensor requires a stable power supply to work properly. Specific power supply requirements may vary depending on the product model and manufacturer, but there are usually clear voltage and current range requirements. In actual applications, ensure that the power supply voltage is stable and meets the specifications of the sensor, and check whether the power supply line and connector are intact.

4. How does the GC0308 camera sensor work with a processor or other hardware components?

Answer: The GC0308 camera sensor needs to be used with a specific processor, ISP (image signal processor) or other hardware components. When selecting these components, ensure that they are compatible with the GC0308 camera sensor. At the same time, when designing circuits and writing software, the sensor's data sheet and interface specifications should be followed to ensure the correctness and stability of signal transmission and data processing.

5. How to debug and optimize the GC0308 camera sensor during use?

Answer: The GC0308 camera sensor may need to be debugged and optimized during use to improve image quality and system performance. Debugging work can include checking data transmission lines, adjusting clock polarity, optimizing image function module configuration, etc. In addition, development tools or software can be used to adjust parameters and optimize performance of the sensor. During the debugging process, attention should be paid to observing changes in image quality and system stability so as to make timely adjustments and optimizations.